These are not control points, but simply an adhesive layer to attach control points! Not all of our control points are self-adhesive. Our Classic control points must be attached with an adhesive. It is quicker and more convenient to use our 3M adhesive pads. Your Benefits: double-sided adhesive strong adhesive power yet still completely removable weather resistant accommodates material movements (expansion and contraction due to temperature changes) practical "tongue" on the edge for easier removal of the upper protective layer available in small quantities 30 mm diameter, perfectly fitting our Classic control points (slightly overhanging for easy removal) Save time installing control points on-site – use our adhesive pads! Important Notes: Cleaning the adhesive surface before application significantly increases the adhesive effect. To use COREDINATE, you will also need our control points. Technical Details: Self-adhesive: yes Length: 3.0 cm Width: 3.0 cm Height: 0.1 cm

Compared to the Beacon Mini, our Bluetooth Beacon Maxi model is designed for outdoor use. It is built even more robustly and is IP54 splash-proof. The commercially available AA batteries can be easily replaced from the front without removing the beacon. Your Advantages: The Beacon Maxi from COREDINATE is quickly and easily integrated into the system like a normal control point. Beacons are active, unlike passive NFC tags. Using Beacons as control points, it is sufficient for the employee to enter the transmission radius of the Beacon to be registered by COREDINATE. Beacons are ideal when it is not necessary (or perhaps even hindering) for the employee to come up to the control point to scan it. Typical Use Cases: Monitoring of solar fields Documentation of patrols through residential areas and settlements Construction site security Securing public spaces In short: Beacons make sense whenever it is sufficient to document an employee's presence easily. A manual scan by the employee is not required; they can even keep the smartphone in their pocket during the patrol. The scan of a beacon is carried out automatically when the employee enters the transmission radius. A vibration, a sound signal, and a text message in the COREDINATE app indicate a successful scan. Advantages of the Beacon Maxi: High range of approximately 100 meters (depending on conditions) Long battery life of up to 4 years Batteries can be easily replaced by the user Extremely easy to attach with practical drill holes Specifications: Color: white Material: plastic, hard Self-adhesive: no Dimensions: 90 x 50 x 29 mm Battery: 2 x AA 1.5 volts (replaceable, NOT included)

The Beacon Mini from COREDINATE is quickly and easily integrated into the system like a normal checkpoint. At the same time, it has some advantages compared to the normal passive NFC checkpoints because Beacons are active. When using Beacons as checkpoints, it is sufficient if the employee enters the transmission radius of the Beacon and the scan is registered by COREDINATE. Beacons are therefore ideal when it is not necessary (or perhaps even obstructive) for the employee to come close to the checkpoint to scan it. Typical applications: Securing large industrial halls Monitoring solar fields Construction site monitoring Securing public spaces In short: Beacons always make sense when it is sufficient to simply document the presence of an employee. A manual scan by the employee is not necessary, he can even leave the smartphone in his pocket during the round. The scan of a Beacon is carried out automatically when the employee enters the transmission radius. A vibration, a signal tone, and a hint text in the COREDINATE app indicate the successful scan. Advantages of the Beacon Mini: High range of about 25 meters (depending on conditions) Long battery life of up to 3 years Battery can be easily replaced Compact design - easy to attach Specifications: Color: white Material: hard plastic Self-adhesive: no Length: 40 mm Width: 40 mm Height: 15 mm

Unfortunately, it often happens that not only the staff is interested in control points - occasionally, they are simply removed or intentionally damaged. To prevent this or at least make it as difficult as possible, we have included our nails in the program. These are control points in the form of nails that can be scanned as usual, but offer far less vulnerable surface area. Simply drill a pilot hole and drive in our control point nails – if desired, you can additionally protect them from being pulled out by using adhesive. The head can protrude slightly or you can sink the nail flush with the surface. Thus, pulling or prying is practically impossible. Specifications: Color: black Material: hard plastic Self-adhesive: no Length: 3.7 cm Width: 0.6 cm (body), 0.8 cm (head) Please note that due to the smaller scanning area, you need to aim more precisely when scanning these nails. Depending on the sensitivity of the NFC antenna in your mobile device, we recommend ordering a smaller quantity initially and testing the functionality. Also, note that there may be interference during installation in metal. The nail is very sturdy, however, we still do not recommend hammering it in like a regular nail without pre-drilling!

With normal control points, interference can occur when installed on metal - not so with our On Metal series of control points. Here, a shielding has been incorporated to significantly reduce interference caused by the underlying metal.Your Advantages: These control points are self-adhesive and can be applied quickly and easily, similar to a sticker. Specifications: Shape: round Color: white Material: flexible plastic Self-adhesive: yes Length: 2.9 cm Width: 2.9 cm Height: 0.1 cm

Our classic control points are cost-effective yet highly resilient. They can be conveniently attached with adhesive. Thanks to their sturdy construction, they can be dismantled and repositioned at any time. Important Note: We recommend attaching the control points using 3M adhesive pads. These pads provide a reliable and practical solution for mounting the control points. If you still choose to attach the control points with screws, please ensure that the screws do not protrude far beyond the edge of the hole, as this can interfere with the scanning process. Additionally, use flat screw heads to ensure direct contact between the reader (phone) and the control point. Specifications: Color: black Material: hard plastic Self-adhesive: no Length: 2.9 cm Width: 2.9 cm Height: 0.2 cm

With our NFC seals, you can kill two birds with one stone: on the one hand, items connected to them (e.g., keys or cash boxes) can be recognized with a scan, and on the other hand, you prevent tampering with the item itself. Our seals can only be reopened with force once they are closed. This makes any kind of unauthorized access immediately detectable – for example, if a key has been removed from a keyring. Please note that the seal cable must not be shortened as this constitutes mechanical damage. This voids the warranty and can no longer guarantee functionality. Your Benefits: With our seals, you can also fully utilize the potential of the COREDINATE key management system. The keys or keyring are provided with the seal and once registered in the system – from now on, every key handover can be recorded with a simple scan. Clean and traceable without any paperwork. The seals are sturdy yet compact enough not to interfere on a keyring. The wire is stable and suitable for continuous use. Specifications: Color: red Material: hard plastic Self-adhesive: no Length: 1 cm Width: 3.5 cm Height: 2.5 cm